Hydraulic coulter
pressure adjustment
To adjust the seed placement, set the coulter
pressure as described in the
Coulter
section,
subitem
Coulter
pressure.
In working position the piston rods of the single
acting cylinders are pushed in by the coulter
pressure.
The coulter pressure adjustment must be done
at a location in the field that exhibits average
soil condition.
The coulter pressure can then be increased
hydraulically on difficult or hard subsections.
The hydraulic pressure can be removed again
from the cylinders with average field conditions.
¾
Apply pressure to the tractor control unit to
activate the coulter pressure adjustment.
¾
Switch the tractor control unit to floating
position to deactivate the coulter pressure
adjustment.
Hydraulic coulter pressure adjustment
NOTE
When operating the hydraulic coulter pressure
adjustment the seed quantity can be increased
by a user-defined percentage.
¾
Follow the operating instructions for the
E-Manager.
88
89
Summary of Contents for Pronto 3 - 6 DC
Page 2: ......
Page 5: ......
Page 20: ...Keep sufficient safety distance to the slewing range of the machine 00381117 16 ...
Page 128: ......