horsch Maestro SW 1630 Owner'S Manual Download

Page: 85 / 132

Maestro SW Owner’s Manual – Ver. 2.4 11/2018

www.horsch.com

Meter Housing

In the meter housing, seeds are fed from the

SOD system to the metering unit.

Metering Housing

1. Outside Scraper

2. Adjustment lever for Outside Scraper

3. Inside Scraper

4. Fill level plate

Meter Housing – Except Soybean

Meter Housing for Soybeans

There is a specific meter housing for soybeans.

It is part of the soybean kit and must be

exchanged with the standard meter housing

when planting soybeans. In the soybean housing

the outside scraper with two notches and the

inside scraper version “C” are already installed.

Meter Housing for soybeans with mark “Soja”.

For information related to proper identification of
scrapers see the following page.

Meter Housing for Soybeans

Summary of Contents for Maestro SW 1630





































































































































Search results

Summary of Contents for Maestro SW 1630

Reviews:

Related manuals for Maestro SW 1630

Brands by name

Popular brands

horsch Maestro SW 1630, Owner'S Manual

Search results

Summary of Contents for Maestro SW 1630

Reviews:

Related manuals for Maestro SW 1630

Brands by name

Popular brands