horsch Maestro SW 1630, Owner'S Manual

Page: 58 / 132

58 Maestro SW Owner’s Manual – Ver. 1.1 09/2016
www.horsch.com
Road Lighting Equipment
Pin Description
1. 7-pin Plug
2. Rear Light, Right
2.1 Lamp, Direction Indicator
2.2 Lamp, Taillight
2.3 Lamp, Brake Light
3. Rear light, Left
3.1 Lamp, Brake Light
3.2 Lamp, Taillight
3.3 Lamp, Direction Indicator
Plug and Wire Assignment
1. Yellow – Indicator, Left
2. Unused
3. White – Earth Ground
4. Green – Indicator, Right
5. Brown – Rear Light, Right
6. Red – Brake Light
7. Black – Rear Light, Left
Check the road lighting equipment at regular
intervals to prevent any other road users from
being endangered by negligence!
Operation
Danger of injury when working with the machine.
Always wear adequate protective equipment for
all repair and maintenance work.
Danger of injury caused by function related
sharp edges. Be cautious when working on the
machine, wear protective clothing, if necessary.
Hitching / Unhitching the Machine
DANGER! Crush Hazard – There
is a possibility that persons may
become crushed or severely or
fatally injured between tractor
and machine. No person is to
remain between the tractor and
machine when hitching up and
unhitching. Instruct all persons
to leave the danger zone.
Hitching-up the machine:
With negative drawbar load the machine may tilt
back and cause severe injury to persons.
Secure the machine at the coupling with hitch pin
and safety security chain!
1. Hitch up the machine to the trailer
coupling ring on the tractor. Secure with
hitch pin and safety chain.
2. Connect planter ISOBUS controls.
3. Plug in cable for additional power supply.
4. Connect all hydraulic lines/hoses,
including Case Drain.
5. Connect the road lighting equipment plug
and check the function.
6. Left front hitch jack so machine is resting
on tractor rear drawbar.
7. Lift the machine.
8. Fold the side section wings in and set in
home position.