horsch Maestro SW 1630 Owner'S Manual Download

Page: 35 / 132

Maestro SW Owner’s Manual – Ver. 2.4 11/2018

www.horsch.com

Hitching / Unhitching Safety

There is risk of injury to persons when

hitching/unhitching the machine to the drawbar

of the tractor.

•

Secure the machine against rolling away.

•

Take special care when reversing the

tractor. Never stand between the tractor

and machine. THIS IS A CRUSH ZONE!

•

Only park the machine on a firm and level

surface.

•

Always lower the front hitch jack before

unhitching the machine, then unfold the

wings and lower it to the ground.

Changing Implements

• Secure the machine against unintended

and accidental rolling!

• Secure lifted frame parts, under which you

will be working, with suitable supports!

• Caution! Danger of injury caused by

protruding parts (tines, discs)!

• Do not use the packer or other rotating parts

when climbing onto the machine. These

could start to rotate and you could fall and

be seriously injured.

Summary of Contents for Maestro SW 1630





































































































































Search results

Summary of Contents for Maestro SW 1630

Reviews:

Related manuals for Maestro SW 1630

Brands by name

Popular brands

horsch Maestro SW 1630, Owner'S Manual

Search results

Summary of Contents for Maestro SW 1630

Reviews:

Related manuals for Maestro SW 1630

Brands by name

Popular brands