horsch Maestro RC Central Fill 1230, Owner'S Manual

Page: 82 / 108

82 Maestro RC Owner’s Manual – Ver. 2.1 10/2019
www.horsch.com
Inside Scraper
The inside scraper cannot be adjusted. Versions
A, B and C are available for the different seed
grain types. The correct inside scraper must be
installed for the desired crop.
Inside Scraper A, B & C
Type of Seed Inside Scraper
Corn
A Sunflower
Cotton
Sugar Beet
B Sorghum
Canola
Soybean
C
Wheat
The soybean kit has the inside
scraper “C” already installed in
the meter housing.
The scraper must be free to move,
and it should rest against the
metering disk. This can be
checked through the opening in
the air intake dust screen.
Wear and Inspection of Inside
Scraper
The inside scraper wears off in the area of the
marking and must be replaced in case of visible
signs of wear.
The shape of the scraper point must be
maintained. The smallest traces of wear or
flatness will cause faults.
In new condition, the material thickness is 9 mm.
If worn down to less than 8 mm, the inside
scraper must be replaced.
Inspection of Inside Scraper