horsch Maestro 16 SX Operating Instructions Manual Download Page 81

Page: 81 / 158

Drill unit | 8

60026387 • 01 • 03/2021 • en

The rollers shall run symmetrically over the seed furrow.

4. Adjust the distance of the spike or finger press wheels using the sleeves sup-

plied.
Distances (a) and (b) must be equal. The press roller must turn freely and may
not collide with other components.

Profiled press rollers

• Width 50 mm

• recommended for dry conditions

• recommended on sandy light soils

• recommended for fine seeds

Profiled press rollers

8.1.5 Clearing stars (option)

The clearing stars clear stones and larger lumps of soil out of the drilling range. The
blade shape produces a cutting effect for high portions of organic substances.

The working height of the clearing stars is directly at field surface level. They can
also submerge slightly into the ground.

Summary of Contents for Maestro 16 SX































































































































































Search results

Summary of Contents for Maestro 16 SX

Reviews:

Brands by name

Popular brands

horsch Maestro 16 SX, Operating Instructions Manual

Search results

Summary of Contents for Maestro 16 SX

Reviews:

Brands by name

Popular brands