horsch Maestro 16 SX, Operating Instructions Manual

Page: 41 / 158

60026387 • 01 • 03/2021 • en 41
6 Operation
WARNING
Ø
Whenever working on the machine pay attention to the associated safety
notes in the chapter "Safety and Introduction" as well as the accident preven-
tion regulations!
6.1 Tractor change
When changing the tractor, the machine must be adapted to the tractor.
Ø
Adapt the propshaft and the height of the drawbar eye/spherical cap, see
chapter
Commissioning .
6.2 Connecting / Parking
DANGER
Serious accidents when manoeuvring and coupling!
Ø
Keep an eye on your environment.
Ø Order persons to leave the manoeuvring area around the machine.
Ø
Instruct persons to leave the area between tractor and machine.
Ø
No person must be present in the danger zone when the tractor approaches
the machine or moves away from it!
WARNING
Leaking hydraulic fluid can cause serious injuries! Danger of injury by
unwanted machine movements.
Ø
Connect and disconnect the hydraulic lines only when the hydraulics are
without pressure on both tractor and machine.
6.2.1 Connecting
The machine must be properly connected to a tractor before any machine move-
ments.
DANGER
Serious accidents from loss of stability!
Ø Park the machine only on a level and firm ground.
Ø
Secure the machine against rolling away before unhitching.