horsch Maestro 16 SX Operating Instructions Manual Download Page 40

Page: 40 / 158

5 | Attachment

60026387 • 01 • 03/2021 • en

NOTE

Operate the machine with mineral-based hydraulic oil.
Do not mix mineral oils with organic or ester oils.
The hydraulic circulation of the tractor must contain mineral-based hydraulic
oil.

Oil purity acc. to ISO 4406: 18/16/13

Always plug in all hydraulic lines!
Otherwise components may get damaged because of interrelated functions.

Ensure cleanliness and tight fit of all plug-and-socket connections!

Observe the notes on hydraulics and pressure accumulator in chapter

Safety

and responsibility

5.5.1 Marking of hydraulic hoses

Symbols on the handles of the hydraulic couplings indicate the function of the re-
spective hoses:

NOTE

The following hydraulic movements are carried out via the hoses marked with

Lift

Folding

Retraction of cultivation tools

Fan flow

Summary of Contents for Maestro 16 SX































































































































































Search results

Summary of Contents for Maestro 16 SX

Reviews:

Brands by name

Popular brands

horsch Maestro 16 SX, Operating Instructions Manual

Search results

Summary of Contents for Maestro 16 SX

Reviews:

Brands by name

Popular brands