horsch Maestro 12.45 CV, Operating Instructions Manual

Page: 25 / 155

Technical data
Maestro 8.70 CV
8.75 CV
8.80 CV
8.30" CV
9.70 CV
9.75 CV
9.80 CV
9.30" CV
12.45 CV
12.50 CV
Transport width (m) 3.00 3.00 3.00
Transport height (m) 3.90 3.90 3.90
Transport length (m) 6.50 6.50 6.50
Curb weights
Drawbar load (kg)
3 800 - 5 400 3 850 - 5 400 4 500 - 5 900
Axle load (kg) 800 - 1 800 800 - 1 800 800 - 2 000
Technically permissible weights
Drawbar load (kg)
3 000 3 000 3 000
Axle load (kg) see data on the type plate
Hopper capacity seed wagon (l) 3 000 3 000 3 000
Seed wagon filling opening (m) 1.00 x 2.40 1.00 x 2.40 1.00 x 2.40
Seed hopper capacity (l) 70 70 70
number rows 8 9 12
Coulter pressure hydraulic (kg) 150 - 350 150 - 350 150 - 350
∅ Depth guide wheel (cm) 40 40 40
∅ Press rollers (cm) 30 / 33 30 / 33 30 / 33
Row spacing (cm, inch) 70 / 75 / 80 / 30″ 70 / 75 / 80 / 30″ 45 / 50
Drilling depth (cm) 1.5 - 9 1.5 - 9 1.5 - 9
Dropping height seed (cm) 45 45 45
Working speed (km/h) 2 - 12 2 - 12 2 - 12
Tyres Load index Air pressure (bar) Permissible load bearing
capacity at 40 km/h (kg)
270/95 R 36 *) 139 A8 4 2 430 **)
500/85 R 24 177 A8 2.8 6 150
710/50 R 26.5 181 A8 2.8 6 270
NOTE:
•
Deviations due to technical further development reserved.
•
The weight of the implement depends on the equipment; specification with minimum equipment
•
The permissible transport heights and transport width for road traffic may differ from country to country. Comply with
the national registration regulations.
*)
only 8.XX CV and 12.XX CV
**) It is possible in the framework of road approval, that the load capacity of twin tyres must have a specific minimum
factor (e.g. 0.285) of the technically permissible axle load.
The technically permissible axle load is therefore possibly lower than the sum of the individual load capacities of the
tyres. Observe the data in the type approval as well as the respective national legal regulations in this regard!
21