horsch Leeb 6 GS, Operating Instructions Manual, Page: 53 / 154

53
3.4 Induction hopper
Induction hopper with filling port ECOFILL* and
canister flushing. *optional
1 Slewable induction hopper for tipping in,
diluting and drawing in crop protection
products and carbonyl diamide.
2 Hinged lid
3 Handle to swing the illuviation tank
4 Parallelogram arm to swing the illuviation
tank from transport to filling position
5 Switching taps for canister flushing / closed
circuit flushing line / shock nozzle/ wash-
ing gun
6 Check the transport lock for securing the
swivelled up induction hopper in transport
position against accidental swinging down.
7 Filling connection ECOFILL (optional)
8 Ball valve “Sucking-off” induction hopper /
filling connection ECOFILL
9 Separating web in extraction area
10 Pressure plate
11 Rotating canister flushing nozzle to flush
out canisters or other containers
12 Closed loop line to dilute and induct crop
protection products and carbonyl diamide
Swinging the induction hopper to filling position:
1. Grasp the handle (3) with your right hand.
2. Loosen the interlock (6).
3. Swing down the illuviation tank.
With the canister flushing (16)
switched on, water emerges from the
canister rinsing nozzle, if the pres-
sure plate (10) is pressed down.
7
8
1
2
3
5
4
6
Induction hopper
ECOFILL
CLOSE
UP
16
17
18
19
20
Controls of induction hopper
(16) Canister flushing
(17) Closed circuit flushing
(18) Shock nozzle
(19) Washing gun
(20) Ball valve “Sucking-off” /
ECOFILL
11
10
9
12