horsch Leeb 6 GS, Operating Instructions Manual, Page: 45 / 154

45
2.9 Technical data
Danger
Danger of accident caused by unstable driving situations!
Exceeding the permitted payload is prohibited.
Carefully determine the payload and thus the permissible filling quantity for the machine
(payload = permissible total weight – basic weight).
Not all chemicals or solution allow a complete filling of the machine.
Machine type 6 GS 7 GS 8 GS
Curb weight (kg) 5500 5540 5610
drawbar load empty / full (kg - water)* 870 / 3000 870 / 3500 900 / 4000
Axle load empty / full (kg) * 4630 / 9450 4670 / 9610 4710 / 10000
max. total length in transport position (m) 8.37 8.37 8.37
Transportwidth in transport position (m) 2.80 2.80 2.80
Height (m) 3.60 3.60 3.60
Track widths (m) 1.80 / 2.00 / 2.25 2.00 / 2.25 2.00 / 2.25
max. ground clearance under axle (m) 0.85 0.85 0.85
Hopper
Rated volume (litres) 6000 7000 8000
Actual volume (litre) 6500 7400 8400
Fresh water tank (litres) 530 530 530
Hand washing tank (litres) 15 15 15
Spray boom
Working widths (m) 36 / 24 / (12) 7-piece
33 / 24 / 12 7-piece
32 / 24 / 12 7-piece
30 / 24 / (12) 7-piece
30 / 21 / 12 7-piece
28 / 21 / 12 7-piece
27 / 21 / 12 7-piece
24 / 12 5-piece
21 / 12 5-piece
min./max. sections 6 / 13
Working height (m) 0.3 - 2.5
Pump power Centrifugal pump (litres/min) 1000
max. working pressure (bar) 8
Working speed (km/h) 4 - 18
All dimensions and weights depend on boom width, tyres and equipment.
* The support and axle loads are given in water filled condition. If other fluids with a higher density are used, this
may probably affect the filling capacity and thus also the permissible supporting and axle loads.