horsch Leeb 6 GS, Operating Instructions Manual, Page: 17 / 154

17
1.7 Safety regulations for the
operator
WARNING
Danger of crushing, cutting, being
pulled in, being caught and impact
caused by missing traffic and operating
safety features.
Before each start-up you must check both
machine and tractor with respect to road and
operating safety!
1.7.1 Safety and accident
prevention instructions
¾
Pay attention to the notes in these operating
instructions and the generally valid safety and
accident prevention instructions!
¾
Before each start-up of the machine all safety
and protective features must be properly as-
sembled and fully functional. Check all safety
installations and protective features at regular
intervals.
¾
The attached warning and information decals
provide important notes for danger-free op-
eration; follow these notes for your own safety!
¾
When using public roads pay attention to the
relevant regulations!
¾
Faulty or disassembled safety installations
and protective features can lead to danger-
ous situations.
¾
Become familiar with all equipment and con-
trol elements as well as their functions before
starting work. It is too late for this once you
have started work!
¾
Before starting to drive and before starting up
check the immediate vicinity! (for children!).
¾
Ensure sufficient visibility!
¾
Hitch up the machine properly and use only
the specified facilities to fasten and secure
the machine!
¾
When driving on slopes – danger of tipping
over!
¾
Pay attention to the permissible axle loads,
total weight and transport dimensions!
¾
Transport equipment – such as e.g. lighting,
warning facilities and possible protective fea-
tures – must be checked and installed!
¾
Operating elements (ropes, chains, linkages
etc.), which are far away from the operated
elements, must be routed in such a way, that
they will not trigger unintended movements
in any of the transport and working positions.
¾
Make equipment fit for road travel and lock as
specified by the manufacturer!
¾
Always match the travel speed to the ambient
conditions!
¾
When driving up and down hill and across the
slope avoid sudden cornering!
¾
Consider the overhang and/or centrifugal
mass of the machine when cornering.
¾
Only start operation of the machine after all
protective features have been installed and
are functional!
¾
Keep safety installations in good condition.
Replace missing or damaged parts.
¾
It is prohibited to remain inside the working
range!
¾
Using the machine for riding on or transporting
persons is prohibited!