horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 79 / 308

Single wheel lifting device
A jack can be positioned on the lifting device,
e.g. for a tyre change. This allows changing
each tyre individually in spite of single wheel
suspension.
The lifting device can be mounted with each
variant of the planetary gear.
WARNING
¾
Switch off the engine!
¾
Engage the parking brake and secure the ma-
chine with wheel chocks against rolling away.
¾
Chemical tank and fresh water tank must be
empty when lifting.
¾
Lift only one steering knuckle at a time.
¾
Check the lifting device for cracks before
each use.
¾
The suspension must be lowered completely.
¾
The jack must have a lifting capacity of at
least 5 tons.
NOTE
Lower the machine completely.
Leeb VL: Disengage the linkage for the level
suspension. This must be done separately for
each axle and each wheel. All 4 level valves
must be opened at the same time.
Leeb VN: Lower the suspension via the terminal.
After using the lifting device, reset the suspen-
sion to its original state. Refer also to the section
Suspension .
Delivery
The lifting device is mounted to the hydraulic
brackets of the travel drive when delivered. This
is only the delivery position!
Lifting device delivery position
¾
Unscrew the lifting device, together with the
mounting brackets, before working with the
machine and store it at a safe location.
Lifting device with mounting bracket
Installation
Lifting device installed
74 75