horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 32 / 308

Installation
Instruction of the operator and initial installation
of the machine will be carried out by HORSCH
service technicians or distributors.
Any prior use of the machine is prohibited.
The machine can only be released for opera-
tion after the instruction session conducted by
our service technician / distributor and after the
operating instructions have been read.
WARNING
Increased danger of accidents during installation
and maintenance.
¾
Read these operating instructions and be-
come acquainted with the machine before
starting this work.
Depending on the scope of equipment
¾
Take the unattached delivered parts off the
machine!
¾
Check all important screw connections!
¾
Lubricate all grease nipples!
¾
Check air pressure in tyres.
¾
Check all hydraulic connections and hoses
for correct fastening and function!
¾
Immediately rectify any occurring damage or
have it corrected!
Assemble the wheels
WARNING
Use only approved tyres as specified in the
technical data.
The rims matching the tyres must be suitable
for the respective loads!
Initial commissioning of
the service brake system
NOTE
Test braking must be performed in the begin-
ning with the crop protection sprayer empty and
loaded to test the brake characteristics of the
self-propelled crop protection sprayer. Compli-
ance with the permissible total weight must be
ensured.
Track width
Adjust the desired track width at first commis -
sioning. Note the Track width section in this regard.
Height
Adjust the desired height at first commissioning.
Refer to the height adjustment section.
CAUTION
The machine’s centre of gravity shifts upward
when changing the height.
¾
Adjust the travel mode accordingly.
¾
Avoid extreme situations such as driving on
slopes!
28 MF