horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 31 / 308

Commissioning
NOTE
These work activities may be carried out only by
persons trained by HORSCH for this purpose.
WARNING
Increased danger of accidents during commis-
sioning.
¾
Pay attention to the notes from the safety
chapter!
Delivery
The machine is normally delivered completely
assembled on a low loader.
If parts or assembly groups had to be disas-
sembled for transport purposes, these will be
assembled locally by our distributor or field
technician.
Lifting and lashing points are identified by labels.
When using other lifting points pay careful at-
tention to the centre of gravity and the weight
distribution. These points must, in any case, only
be on the frame of the machine.
With all machines, the hydraulic functions are
possible without additional installation.
Pneumatic level suspension (only Leeb VL)
To minimise the transport height, the folding
boom for the level suspension may have been
unhooked when delivered.
NOTE
The folding boom must be attached in standard
operation! Bolt down the folding boom as shown.
Folding boom level suspension hooked up
Transport
Depending on country-specific regulations and
working width the machine can either drive on
public roads or be transported on a trailer or
low loader.
¾
Pay attention to the operating instructions of
the transport vehicle.
¾
On a trailer or low loader, the machine must
be secured with load straps or other means.
¾
The permissible dimensions and weights for
transport must be complied with.
¾
Attach lifting tackle only at the marked points.
¾
Note the centre of gravity of the machine
when loading.
¾
All tanks of the sprayer be must empty.
MF 27