horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 293 / 308

5. Reattach the hoses on the sensor of the fresh
water tank. Fasten the wide clamp again.
6. Properly dispose of the collected residual
spraying mixture!
Drainage / residue drain water
systems Basic Pro and CCS Pro
Spraying mixture container
1. Switch off all functions.
2. Open the suction filter.
3. Remove the cap on the residue drain / filling
port.
4. Put a suitable collecting vessel under the
drain.
5. Activate the residue drain function on page 3
of the external control terminal to completely
drain the spraying mixture container.
6. Empty the pressure filter via the valve.
7. Deactivate the
residue drain
function on the
external control terminal again.
8. Close the port again with the cap!
9. Properly dispose of the collected residual
spraying mixture!
Fresh water tank
1. Remove the cap on the connection for fresh
water filling and open the ball valve.
2. Allow the fresh water to drain.
3. Close the ball valve again and close the port
again with the cap.
4. Drain the hoses on the sensor of the fresh
water tank. Loosen the wide clamp on one
side for this purpose.
5. Reattach the hoses on the sensor of the fresh
water tank. Fasten the wide clamp again.
6. Properly dispose of the collected residual
spraying mixture!
Putting the sprayer system into
winter storage
Clean machine with fresh water
¾
See chapter Cleaning .
Empty the machine completely
¾
Drain and clean suction filter.
¾
Drain and clean pressure filter.
¾
Activate the air function (optional).
¾
Operate the high pressure cleaner until no
more water runs out (optional).
¾
Operate the NightLight until no more water
runs out (optional).
288 289