horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 255 / 308

Draining the spraying mixture container
via the pressure output
Water systems Basic Pro and CCS Pro
Pressure output
1. Couple a discharge hose with 2″ Camlock
coupling on the pressure output.
NOTE
Drainage output can be controlled with the ball
valve.
If the valve is fully open, the pump delivers with
full output via the pressure output.
2. Switch on the circulation on the terminal.
3. Drain the spraying mixture container.
4.
After drainage switch off the circulation to
shut off the pump.
5. Close the ball valve and remove the dis-
charge hose.
6. Close the pressure output with the cap.
250 251