horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 24 / 308

Danger zone
No person may be present in the danger zone
while the machine is in operation!
The danger zone around the machine poses the
following hazards:
•
Accidental operation of the hydraulics can
trigger dangerous movements of the machine.
•
With the drive still running, machine parts may
rotate or swing out.
•
Hydraulically raised machine parts can lower
slowly and unnoticed.
•
By accidental rolling or driving of the machine.
Danger zone during operation of the machine:
16 ft
(5 m)
16 ft
(5 m)
32 ft
(10 m)
32 ft
(10 m)
Danger zone when folding the folding boom:
32 ft
(10 m)
32 ft
(10 m)
32 ft
(10 m)
32 ft
(10 m)
Danger zone when lifting/lowering the folding
boom:
16 ft
(5 m)
16 ft
(5 m)
16 ft
(5 m)
16 ft
(5 m)
Danger zone with active BoomControl:
16 ft
(5 m)
16 ft
(5 m)
16 ft
(5 m)
16 ft
(5 m)
Danger zone with steering/all-wheel steering:
radius
6 ft (2 m)
radius 6 ft (2 m)
radius
6 ft (2 m)
radius 6 ft (2 m)
Failing to pay attention to the danger zone can
result in severe or even fatal physical injuries.
¾
Do not stand under lifted loads. Lower such
loads to the ground first.
¾
Before any machine movements ask persons
to leave the danger zone of the machine.
¾
Before any work in the danger zone of the
machine!
This also applies to temporary inspection
work.
Many serious accidents happen because of
carelessness and running machines!
¾
Pay attention to the information in all operat-
ing instructions.
20 MF