horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 122 / 308

Switching on the climate control
system
In automatic operation, the air conditioning
compressor, heating and ventilation are auto-
matically controlled so that the specified cabin
temperature is reached as quickly as possible
and then kept constant.
This operating mode is ideal for high outdoor
temperatures.
3 8 9
2
Activate climate control:
¾
Switch off REHEAT mode (3), manual fan
control (8) and ECON mode (9). The function
lights (3), (8) and (9) are off.
¾
The function light for automatic mode (2) lights
up. Climate control is active.
¾
When outside temperatures are below 10 °C,
the climate control system switches off the
air-conditioning compressor.
Setting the cabin temperature
WARNING
If the outside temperature is very high, avoid too
great a difference between the cabin tempera -
ture and the outside temperature.
5 7
9
1
The display (1) shows the currently set tem-
perature.
¾
The temperature can be reduced by pressing
the Minus key (5).
¾
The temperature can be increased by press-
ing the Plus key (7).
¾
1x pressing corresponds to 1 °C or 1 °F.
The climate control automatically regulates the
cabin temperature to the set value. The fan
speed is slowly increased so that the cabin
temperature reaches the setpoint value more
quickly. When the cabin temperature approach-
es the setpoint, the fan speed is reduced again.
In ECON mode (9), the temperature cannot be
lowered but only increased. The fan speed can
be changed manually.
Manual fan speed control
The fan speed can be controlled manually.
5 6 7
8
Activate fan setting:
¾
Switch on manual fan control (8). The func-
tion light (8) lights. Manual fan speed control
is active.
¾
The bar diagram (6) shows the currently set
fan speed. Maximum speed corresponds to
a 100% filled bar.
¾
The fan speed can be reduced by pressing
the Minus key (5).
¾
The fan speed can be increased by pressing
the Plus key (7).
¾
1x pressing corresponds to 10%.
The changed setting is saved and activated after
5 seconds.
By switching off the manual fan control (8), the
fan speed is automatically controlled again.
118 119