horsch Leeb 5.280 VL, Operating Instructions Manual

Page: 118 / 308

Multi-function control
panel
The multi-function control panel and the arm
rest, which form one common unit, are located
inside the cabin to the right of the driver’s seat.
NOTE
After adjusting driver’s seat and steering column
you should check whether the multi-function
lever can be optimally operated. If not, adapt
the adjustment as required.
Longitudinal adjustment
¾
Longitudinal adjustment of the armrest by
pulling up the rear lever on the right of the
multifunction control panel and holding it up.
¾
Move the multifunction control panel forwards
or backwards. If the setting is correct, release
the lever again. The multifunction control
panel must lock into this position.
The desired position is now locked.
Height adjustment
NOTE
When the lever is pulled up, the multifunction
panel automatically moves up to the highest
position.
¾
This can be avoided by pressing lightly on the
armrest and holding the multifunction control
panel at a height.
¾
Infinite vertical adjustment of the armrest by
pulling up the front lever on the right of the
multifunction control panel and holding it up.
¾
This can be lowered by pressing down on the
multifunction control panel.
¾
The multifunction control panel can only be
raised by pulling the lever upwards.
¾
If the setting is correct, release the lever again.
The desired position is now locked.
114 115