horsch LEEB 4 LT, Operating Instructions Manual

Page: 80 / 162

4.9.2 Multiple nozzle body manual
3-fold
The 3-fold nozzle body is recommended if more
than only one nozzle type is to be used. Only
the vertically arranged nozzle will be supplied.
By turning the nozzle body, another nozzle is
brought into use.
In intermediate positions the nozzle body is
switched off.
NOTE
Flush the spraying lines before turning the 3-fold
nozzle body to another nozzle type!
If a pressure of more than 4 bar is applied to the
compressed air connection (4), the valve will
open and fluid can flow out. Without pressure
the valve is closed.
1
2
3
4
8
5
6
9
7
1 nozzle body
2 diaphragm
3 pneumatic control valve
4 compressed air connection
5
nozzle filter (optional)
6 rubber seal
7 nozzle
8 bayonet connection
9 bayonet cap
4.9 Nozzle body
4.9.1 Single nozzle body with
pneumatic control valve
If a pressure of more than 4 bar is applied to the
compressed air connection (4), the valve will
open and fluid can flow out. Without pressure
the valve is closed.
7
9
6
8
1
2
3
4
5
1 nozzle body
2 diaphragm
3 pneumatic control valve
4 compressed air connection
5
nozzle filter (optional)
6 rubber seal
7 nozzle
8 bayonet connection
9 bayonet cap
80 81