horsch Joker RT Series, Owner'S Manual

Page: 40 / 50

40 | P a g e
Tracking – Manual Depth Control
Machine may not track straight after initial setting.
To change tracking of the implement add or remove stops from the front cylinder.
To Adjust:
1. If machine is tracking to the right, add more stops to the front cylinder.
2. If machine is still tracking to the right, repeat Step 1.
3. If machine is tracking to the left, remove stops from the front cylinder.
4. Add or remove strops from the front cylinder until the machine tracks straight.
Setting Wing Pressure
The wing pressure is adjustable to keep the wings of the implement level with the rest of the machine
when it is in operation.
1. Set the wing pressure by pushing the wings down with the hydraulic remote to the desired
pressure – between 300-500 psi.
DO NOT EXCEED 500 PSI!
Adjust pressure until the machine is level. The pressure gauge will indicate the level of pressure (psi).
Gauge showing wing pressure.