horsch Joker RT Series, Owner'S Manual

Page: 35 / 50

35 | P a g e
Folding/Unfolding
Folding movements must only be performed on firm and level ground.
The folding process should only be performed in the field, because the coulter discs could get caught in
the ground.
On the road, discs and road surface layer could get damaged.
Joker RT-Series
Folding:
• Raise machine completely with packer and hitch
• Lower rear axle to raise machine with rear axle
• Switch lever on valve block to transport
• Use lift hydraulics to completely lift packer
• Fold in the side wings
• Insert wing lock pins
Unfolding:
• Switch valve block from road to field position
• Raise machine and wings so it is no longer resting on the wing locks
• Remove the wing lock pins
• Unfold and put hydraulic remote into float position
• Raise rear axle so implement is resting on the packer
Do not transport the machine in a position higher than necessary. With the
Joker, consider the transport height, especially in case of bridges or low hanging
power lines.