horsch Focus 7 MT, Operating Instructions Manual, Page: 41 / 78

Folding
WARNING
Dropping or lowering machine parts can cause
severe crushing injuries etc.!
¾
No persons may stay under raised machine
parts!
¾
Instruct persons to leave the danger zone.
¾
Comply with the accident prevention instruc-
tions.
CAUTION
Damages to the machine and the supporting
surface
¾
Fold the machine only on a level and firm
surface.
Unfolding
¾
Swivel the lighting carriers to the field work
position. Remove the pin (A) for this purpose,
swivel the carrier to the other position and
reinsert the pin (A).
A
¾
Turn the switch-over ball valve Field/Road to
Road .
¾
Lift the machine completely.
¾
Remove the aluminium clips for the transport
lock on the hydraulic cylinders at the front axle
and undercarriage axle.
¾
Unfold the machine completely.
¾
Turn the switch-over ball valve Field/Road to
Field .
Folding
¾
Insert aluminium clips 50 mm thick on the
hydraulic cylinders of the support wheels.
¾
Lift the machine completely.
¾
Turn the switch-over ball valve Field/Road to
Road .
¾
Fold the machine completely inward.
¾
Fill the hydraulic cylinders of the front axle
and undercarriage axle with aluminium clips.
These clips serve as transport lock.
¾
Lower the machine to the aluminium clips.
¾
Swivel the lighting carriers to the transport
position. Remove the pin (A) for this purpose,
swivel the carrier to the other position and
reinsert the pin (A).
A
37