horsch 420016020001 Owner'S Manual Download Page 74

Page: 74 / 84

74 Omnis FT Owner’s Manual – Ver. 2.0 06/2020

www.horsch.com

SCH

Lubricating Machine

The machine should be lubricated regularly and after every pressure wash.

This ensures operational reliability and reduces the costs of repair work and down time.

See Maintenance Schedule below.

Hygiene

When used according to regulations, lubricants and mineral oil products present no danger to health.

You should, however, avoid longer contact to the skin and not breathe in any fumes.

Exposure to Lubricants

CAUTION: Avoid direct contact with oils by wearing gloves or protective creams.

Thoroughly wash off traces of oil on the skin with warm water and soap. Do not clean your skin

with petrol, diesel fuel or other solvents. Oil is poisonous. You should immediately visit your

doctor if you have swallowed oil.

• Ensure that lubricants are kept out of reach of children.

• Never store lubricants in open or unlabeled containers.

• Avoid skin contact with oily clothes. Change dirty clothing.

• Never keep oily cloths in your pockets.

• Dispose of oily shoes as hazardous waste.

• Rinse oil that has splashed into your eyes with clean water and visit your doctor, if necessary.

• Absorb spilled oil with suitable bonding agents and dispose of properly.

• Never extinguish oil fires with water. Only use permissible and suitable extinguishing agents and

wear breathing apparatus.

• Oily waste and waste oil have to be disposed of according to the legal regulations. Check with your

local Hazardous Waste Material Management facility.

Service

HORSCH, LLC

hopes you are completely satisfied with your machine and the

HORSCH company

itself.

Please contact your distribution partner or authorized dealer in the event of a problem.

The customer service employees of our distribution partners and customer service employees of the

company

HORSCH

are available for your support.

Please help us solve any technical faults as soon as possible.

Provide the customer service staff with the following details in order to prevent unnecessary queries.

• Customer No.

• Name of customer service advisor

• Name and address

• Machine model and serial number

• Purchase date and operating hours

• Type of problem

Summary of Contents for 420016020001





















































































Search results

Summary of Contents for 420016020001

Reviews:

Related manuals for 420016020001

Brands by name

Popular brands

horsch 420016020001, Owner'S Manual

Search results

Summary of Contents for 420016020001

Reviews:

Related manuals for 420016020001

Brands by name

Popular brands