horsch 420016020001, Owner'S Manual

Page: 69 / 84

Omnis FT Owner’s Manual – Ver. 2.0 06/2020 69
www.horsch.com
HO R SCH
Leveling:
The harrow can be adjusted for level at any time if necessary by using the supplied turnbuckles on each
section (two per section). The harrows are leveled from the factory but if further adjustment is desired
simply turn the adjusting rod of the turnbuckle by hand to obtain level. Turning clockwise will shorten the
rod, lifting that side of the harrow. Turning counterclockwise will lengthen the rod, lowering that side of
the harrow.
Harrow Level Adjustment
Maintenance:
There is little maintenance required for the spring tooth harrow. Periodic inspection of hardware,
turnbuckles and pins for looseness is recommended. Tighten any loose hardware, following proper
torque guidelines spelled out later in this manual in Section 6 – Maintenance & Service. Replace any
missing or damaged hardware with the appropriately called out item noted in the model year specific
parts catalog. Prior to each field use it is also recommended to inspect each spring tooth for loose,
fractured, or broken tines. Replace any damaged components prior to use.