4/27/2022 | MAN1339-01-EN
Indianapolis, USA | Cork, Ireland | Calgary, Canada | Bangalore, India | Oakleigh, Australia | Tianjin, China | Esteio, Brazil
Please visit our website for a complete listing and to learn more about certified Horner Automation products.
This document is the property of Horner Automation Group, and is subject to change.
XLW PRIME QUICK REFERENCE GUIDE
page 1 of 4
XLW Prime Overview
General Specifications
Primary Power Port Pins
PIN
SIGNAL
DESCRIPTION
1
Ground
Frame Ground
2
DC-
Input Power Supply Ground
3
DC+
Input Power Supply Voltage
DC Input / Frame
Solid/Stranded Wire:
12-24 awg (2.5-0.2mm).
Strip length
: 0.28” (7mm).
Torque, Terminal Hold-Down Screws
: 4.5 – 7 in-lbs (0.50 – 0.78 N-m).
DC- is internally connected to I/O V-, but is isolated from CAN V-.
A Class 2 power supply must be used.
POWER UP
1. OPTION: Attach ferrite core with a minimum of
two turns of the DC+ and DC- signals from the DC
supply that is powering the controllers.
2. Connect to earth ground.
3. Apply recommended power.
Power Wiring
Required Power
(Inrush)
25A for
< 1
ms @ 24VDC, DC switched
Primary Power Range
10 - 30VDC
Relative Humidity
5 to 95% non-condensing
Clock Accuracy
+ / - 20 ppm maximum at 25°C
(+/- 1 min/month)
Real Time Clock
Battery Backed, Lithium Coin
Operating Air Temp
-10°C to +60°C
Storage Temp
-20°C to +60°C
Weight
3.9375 lbs (1786g)
Altitude
Up to 2000m
Rated Pollution Degree
Evaluated for Pollution Degree 2 Rating
Certifications
(UL/CE)
North America
Europe
XLW
Prime
NOTE:
See Precaution #12 on page 4 about USB and grounding.
1
Built-in I/O
2
3
4
5
8
7
6
10
9
1. Touchscreen
2. USB 2.0 “A”: Flash Drive
3. LAN Port
4. PWR: 10-30VDC In
5. CAN Port
6. MJ3: RS-232/485
7. Dip Switches
8. MJ1/MJ2: RJ45 Serial Port
9. microSD: Data Storage
10. USB mini “B”: Programming
