III.
IV.
II.
2.
1.
4.
3.
5.
1.
3
2.
I.
9
10
2
3
1
6
5
4
7
8
English
18
Assembly instructions
I. Description
II. Operation
Technical data
Please read these instructions care-
fully and keep them safe for later use!
Safety information
• Electrical work and repairs must be per-
formed by a qualified electrician.
• The luminaire must not be modified in any
way. Risk of electric shock and accident.
• The light source and the battery of this
luminaire are not replaceable; when the
light source or the battery reaches its
end of life the whole luminaire shall be
replaced.
1.
Fold up the handle
10
into basic posi-
tion and fix its screws.
2.
Choose the desired angle and tighten
the angle fixing screws
3
clockwise.
3.
Press On/Off button
9
once to switch
on. Press button repeatedly to reach
different levels of brightness or the
SOS signalling mode: 25% (only
10350852), 50%, 100% or SOS mode.
Press again to switch the luminaire
off. To recharge see section III.
4.
The luminaire can be used as power
bank to recharge smartphones, tab-
lets and similar electronic devices via
USB port
7
. Please observe the power
bank output (see technical data).
5.
Fold the luminaire
1
as shown to hang
by the luminaire stand
4
.
Luminaire:
Rated power:
10350851
20 W
10350852
50 W
Battery:
10350851
3.7 V, 8800 mAh Li-ion
10350852
11.1 V, 4400 mAh Li-ion
Protection class
III
Degree of protection
IP 54
Colour temperature
6500 K
Luminous flux:
10350851
2000 lm
10350852
4800 lm
Weight:
10350851
1.2 kg
10350852
1.35 kg
Size:
10350851
23 x 25.5 x 14.5 cm
10350852
23 x 25.5 x 14.5 cm
Plug adapter:
Input voltage
100 - 240 V
Protection class
II
USB power bank connection:
Output
5 V, 1 A
1
Luminaire
2
Lens cover
3
Angle fixing screws
4
Luminaire stand
5
Plug adapter
6
Charging port
7
USB power bank connection
8
Protective cap
9
On/Off button
10
Handle
19
GB
III. Charging
IV. Maintenance and care
• The luminaire is not intended for commer-
cial use.
• Do not look directly at the lighted lumi-
naire to avoid eye injuries.
• Do not operate work luminaire if it has a
missing or damaged lens cover.
• Never use the luminaire near flammable
surfaces or materials or volatile fluids
such as gasoline.
• Charge the luminaire only with the sup-
plied adapters. Use the adapters only for
charging this luminaire.
Cleaning
Wipe the luminaire with a soft, dry
cloth only. Never use scouring powders
or chemical cleaning agents.
Used symbols
Caution: Risk to health and the
product
Class III appliance, extra-low voltage
(SELV)
Class II appliance, reinforced isolation
Waste disposal
The pictogram with the crossed out
dustbin points to the requirement for
separate disposal of electrical and
electronic appliances (WEEE). Electrical and
electronic appliances can contain hazardous
and environmentally hazardous materials. Do
not dispose of this appliance as domestic
waste. Hand it in at a collection point for
electrical and electronic waste. By doing so,
you will help to conserve resources and
protect the environment. For further details,
please consult your local authorities.
Caution:
•
The luminaire can not be
charged via USB port.
•
Do not charge the battery
outdoors or in damp environ-
ments.
•
Only charge with the original
adapters.
•
Ensure charging port is sealed
before use.
•
Do not use outdoors or in
damp environments with con-
nected power adapter.
1.
Open the protective cap
8
and
insert the charging cable.
2.
Connect the adapter
5
to a suitable
power socket (see technical data).
The battery charging time is 4 to
5 hours.
3.
Close the protective cap
8
firmly
after charging.
Work time:
3 hrs at 100% brightness; 5 hrs at
50%; 15 hrs at 25% (only 10350852)
