Hornbach 6773389, Installation And User Manual

Page: 212 / 218

212 | ENGLISH
1.
Press the Code button until the
LED 1 shines continuously.
2.
Within 10 seconds, press button
1 or 2 of the remote control, or
the activating button of the wall
control.
3.
Press the same button again.
LED 1 will fl ash and turn off .
Repeat steps 1. to 3. to code
up to a maximum of 10 remote
controls.
Pairing controls
LED indicator 1
Button 1 2
Button 2 3
Activating button 4
Remote control
1.
Wall control
2.
< 10 sec. < 10 sec.
2
1
3 4
Safety reversal system test
1.
With the door fully open, place
a board with a thickness of 5 cm
centered in the way of the door.
2.
Press remote control push but-
ton. When closing, the door
MUST reverse when making
contact with the board.
Otherwise do not use the
garage door opener any more;
instead seek professional assis-
tance for repair.
1. 2.
3
WARNING
Without a properly installed safety reversal system, persons (particu-
larly small children) could be seriously injured or even killed by a clos-
ing garage door. Incorrect adjustment of garage door travel limits will
interfere with the proper operation of the safety reversal system.
• The safety reversal system MUST be tested at least once every
month.
• The safety reversal system must be tested after any adjustments
made.