Attention Ultra Micro F-27Q Stryker
180 BNF Owners using the DX6i
Transmitter
Horizon Hobby has discovered an error in the fi rst
printing of the DX6i setup instructions for the Ultra
Micro Stryker 180 manual.
For proper DX6i operation, please use the following
setup for servo channel reversing:
Throttle:
Normal
Aileron:
Reverse
Elevator:
Normal
Rudder:
Normal
Instructions for DX6i receiver elevon connection are
as follows:
Receiver elevon connection for DX6i
When using the DX6i transmitter, it is
necessary to access the AR6400NBL receiver
and exchange the aileron and elevator
connections where they plug into the
receiver in order to achieve the correct
control direction as shown below.
When complete, replace and tape the hatch,
then do a control test to confi rm that the
model operates correctly.
© 2011 Horizon Hobby, Inc.
ParkZone is a registered trademark of Horizon
Hobby, Inc.
www.parkzone.com
Created 08/11 34868
