Function
97
DATA DISP. SET
DATA DISP. SET
Specifies the data display. This allows you to specify whether or not to display the
measurement value outside the measurement range, if the measurement value exceeds the
measurement range.
Operation procedure
1.
Press [DATA DISP. SET] in the OUTPUT SET screen.
The DATA DISP. SET screen will be displayed.
2.
Specify that negative values are to be displayed.
When set “ON”, negative values are displayed and printed as is.
When set “OFF”, all negative values are displayed as “0”.
3.
Specify that values exceeding full scale are to be displayed.
When set “ON”, values exceeding full scale are displayed and printed as is.
When set “OFF”, full-scale value is displayed for all values that exceed full scale.
Main
MENU
SETTING
OUTPUT SET
[MENU]
[OUTPUT SET]
[SETTING]
Refer to “ To display the [MENU] item screen” (page 62).
DATA DISP. SET
[DATA DISP.
OUTPUT SET
Minus Data
Minus Data
SET]
[ ]
DATA DISP. SET
[DATA DISP.
OUTPUT SET
Full-scale
Full-scale Over
SET]
Over
[ ]
