5 Functions
54
5.5.7
Setting of MIN Alarm Value for COD and TURB (turbidity)
Here describes how to set the lower limits of the COD and TURB alarm values.
1.
Press the button of the measuring component on the COD or TURB MEAS.
SETTING screen.
The MEAS. SETTING screen for each measuring component appears.
2.
Press the button for MIN ALARM VALUE.
The MINIMUM ALARM VALUE screen for each measuring component appears.
The screen shows an example of MINIMUM ALARM VALUE for COD.
3.
Enter the lower limit value with the numeric keypad, and press [SET],
Input range:
9999.9 to 9999.9
The description above is provided as an example when the decimal place is set to 1 digit.
Tip
[CLEAR]
：
Clears all input numeric values.
[BACK]
：
Clears the rightmost number.
The screen returns back to the MEAS. SETTING screen for each measuring component.
[MAINT.]
MEAS.
[MEAS. SETTING]
Refer to "
Setting Screen Display for each Measuring Component" (page 46)
COD MEAS. SETTING
MAINTENANCE
MEAS. SETTING
TURB MEAS. SETTING
[TURB]
[COD]
screen
screen
screen
screen
screen
MIN ALARM
VALUE
