horiba LAQUAact-PD110, Instruction Manual, Page: 88 / 117

General settings
72
●
Performing test printing of the printer unit
In order to check whether the printer unit is operating correctly or there is a printer
communication problem, you can perform test printing.
Connect the instrument and a printer correctly and perform the following procedure for
test printing. As a result of test printing, if the printout is as shown below, the printer unit
is operating correctly.
1. Press the key to enter the setting mode.
2. Press the keys to select "GEN" (general setting) and then press the
key.
key
key
key
key