horiba LAQUAact-PD110, Instruction Manual

Page: 36 / 117

Preparation
20
●
Connecting an electrode
To perform measurement, you must use the appropriate electrode for measurement
parameters. Recommended electrodes for each measured sample are listed in our
product catalog and on our website. Refer to them when preparing electrodes. Use the
following procedure to correctly connect the electrode to the instrument.
1. Insert the electrode connector
by fitting its groove with the
connector pin of the instrument.
2. Turn the electrode connector
clockwise by following the
groove.
3. Put the connector cover on the
connector.
4. When using a combination
electrode equipped with a
temperature sensor, insert the
temperature connector (T) into
the jack of the temperature
connector (T).
Tip
If the temperature connector (T) is unconnected or connection is wrong, temperature
selected for MTC (manual temperature compensation) is displayed as the sample
temperature.
Preparation for measurement is complete.
For details of the measurement operation, refer to the following pages.
Electrode connector
Temperature connector (T)