horiba LAQUAact ES-71G, Instruction Manual

Page: 57 / 88

Transferring saved data to a PC
37
●
Transferring saved data to a PC
By using a serial cable (“ Options ” (page 63)) to connect the instrument to a PC, you can
transfer the saved data to the PC and edit it. Connect the serial connector at the
instrument side to the serial port on the PC.
To save and edit data, prepare the software "FD-70".
You can download "FD-70" from our website.
In order to download the software, you need to complete user registration. Refer to the
separate sheet "Introduction for user registration" to register as a user.
For details of how to use the "FD-70", refer to the "FD-70" instruction manual, which you
can download from our website as well.
The required PC specifications and recommended PC specifications for using the "FD-
70" are shown in the following table.
Note
・
If you are not using the RS-232C communication, close the connector cover tightly.
・
While using the RS-232C communication, the instrument is not dust-proof or waterproof.
Do not use the RS-232C communication in a dusty place or with wet hands.
Item Required PC specifications Recommended PC specifications
Memory 256 MB or more 512 MB or more
CPU 1 GHz or more 1.6 GHz or more
HDD free space 5 GB or more 10 GB or more
OS Windows XP (SP3), Windows Vista, Windows 7, or Windows 8
Display Super VGA (800 × 600) or more
Connector Serial connector (D-Sub 9 pin)