horiba LAQUAact ES-71G, Instruction Manual

Page: 39 / 88

Conductivity measurement
19
• Setting the conductivity unit (default: S/cm)
You can select the conductivity unit from three types, S/cm, S/m, mS/cm FIX (fixed at
mS/cm). Select the unit depending on your application.
When measuring resistivity, these units correspond to
Ω ·cm, Ω ·m, Ω ·cm (for mS/cm
FIX).
1. Press the key to enter the setting mode.
2. Press the keys to select the "UNIT (COND)" (conductivity unit setting) and
then press the key.
3. Press the keys to select the unit and press the key.
4. Press the key to reflect the change.
key
key
key
key key