horiba LAQUAact ES-71G, Instruction Manual

Page: 25 / 88

Names of each part
5
●
Operation key
Key Name Function
MEAS key
Changes the operation mode to the measurement mode
during operation in a different mode. The changes you
made using the setting mode are reflected when you press
this key to return to the measurement mode.
In the measurement mode, switches the automatic hold
measurement on/off.
CAL key
Changes from the measurement mode to the calibration
mode.
Start calibration in the calibration mode.
DATA key Changes from the measurement mode to the data mode.
SET key
Changes from the measurement mode to the setting mode.
Changes from the setting mode to the measurement mode
without reflecting changes.
POWER key Turns ON/OFF the power of instrument.
MODE key
In the measurement mode, changes measurement
parameters.
LIGHT key Turns on/off the backlight.
ENTER key
Determines the selection or setting.
Prints data in measurement, the calibration and data mode.
UP key
Changes the selected item.
Changes the number of the selected digit when entering
numbers.
DOWN key
LEFT key
Changes the selected item.
Changes the selected digit when entering numbers.
RIGHT key