horiba LAQUAact-EC110, Instruction Manual

Page: 86 / 105

Other settings
70
●
Transferring saved data to a PC
By using a serial cable to connect the instrument to a PC, you can transfer the saved
data to the PC and edit it (EC120 only). Connect the RS-232C connector at the
instrument side to the serial port on the PC.
To save and edit data, please download the software "FD-70" from our website after the
registration. (The software "FD-70" will be available at the end of February 2016.)
For details of how to use the "FD-70", refer to the "FD-70" instruction manual, which you
can download from our website as well.
The required PC specifications and recommended PC specifications for using the "FD-
70" are shown in the following table.
Note
・
If you are not using the RS-232C communication, close the connector cover tightly.
・
While using the RS-232C communication, the instrument is not dust-proof or waterproof.
Do not use the RS-232C communication in a dusty place or with wet hands.
Item Required PC specifications Recommended PC specifications
Memory
32 bit: 1 GB or more
64 bit: 2 GB or more
CPU 1 GHz or more
HDD free space 5 GB or more 10 GB or more
OS Windows 7, Windows 8 (8.1), or Windows 10
Display Super VGA (800 × 600) or more
Connector Serial connector (D-Sub 9 pin)