horiba LAQUA-PC1500, Instruction Manual

Page: 56 / 100

TDS Setup
38
● P2.1 TDS Curve Setup
1. Press the key, P1 COND screen appears.
2. Press the key,
P2 TDS
screen appears
3. Press the ENT key, P2.1 FACT screen appears.
4. Press the ENT key, default LINR appears.
5. Use the keys to select a TDS curve and press the ENT key.
6. While selecting the linear curve, set a factor in between 0.40 to 1.00 (default 0.50).
7. Press the
ENT key, P2.1 FACT screen appears. This indicates completion of TDS
curve setup.
If you choose
LINR,
you can select a factor in between
0.40 to 1.00.
key
key
key
key
key
key
key
key
key
key
key