horiba LAQUA-PC1100, Instruction Manual

Page: 72 / 117

Measurement settings
56
■
Measurement settings
●
Displaying the latest calibration and inspection data
• In the case of displaying the latest pH calibration data and
repeatability inspection data
1. Press the key to enter the setting mode when "ACT" icon is displayed on the
upper part of the screen.
2. Press the keys to select "pH" (pH setting) and then press the key.
3. Press the keys to select "CAL.DAT" (display calibration data) and then
press the key.
The electrode status based on the calibration result is displayed. You can change the
display item among "OFS" (asymmetry potential), "SLP" (sensitivity), and "REP"
(repeatability).
When pressing the key, the calibration data is printed.
To return to the measurement mode, press the key and then press the key.
key
key
key
key
key
key
Asymmetry potential display
Sensitivity display Repeatability display
key