horiba LAQUA F-71G, Instruction Manual

Page: 69 / 102

Chapter 3 Basic Operation
3.4 Measurement
51
3.4.2 Measurement items changing
When the MODE key is pressed, measurement item can
be changed in the channel where ACT is lit.
3.4.3 Auto data memory
The instrument can perform data memory automatically
at a regular interval. Refer to "3.2.3 Auto data memory
setting" P.20 for the setting operations.
If the auto power off setting is ON, it is temporarily OFF
while this function is active.
1.
After the interval setting is completed, press the
MEAS key to return to the measurement screen.
"Auto LOG" is displayed on the screen.
2.
Press the ENTER key.
"Auto LOGGING" is displayed on the screen, and
the auto data memory function starts.
pH measurement
MODE key
ORP measurement
(mV)
MODE key
ORP measurement
(Relative mV)
CAL key