Chapter 6 TDS (Total Dissolved Solids) Measurement
56
HORIBA
6.2.1 Input TDS Linear Value when selecting LINEAR
6.3 Temperature Setting
The settings of temperature compensation and temperature conversion in COND
measurement apply for TDS measurement (refer to "3.2.3 Temperature Setting" (P.40) and
"3.2.4 Temperature Conversion Function Setting" (P.41)).
6.4 Alarm Setting
When the measurement values exceeds the set upper or lower limit, the instrument
detects it to display the notice on the screen or to output the signal from the external output
terminal.
If the measurement values exceeds the alarm range, the color of the pertinent channel
"CH" is changes on the MEAS screen.
Set the upper limit alarm to ON for the upper limit control of measurement value.
Set the lower limit alarm to ON for the lower limit control of measurement value.
1.
Tap
on the right of the TDS linear value item.
2.
Enter the TDS linear value on the numerical-key
screen and tap
.
The setting applies.
To cancel the settings, tap
.
Upper limit value
Lower limit value
Summary of Contents for LAQUA COND DS-72
Page 1: ...Instruction Manual COND METER DS 72...
Page 2: ......
