Measurement
29
Calibration data check screen
Calibration data check screen
No calibration
data
Screen for no
calibration data
Indicates that there is no previous
calibration data.
-
With calibration
data
Zero value check
screen
Displays the zero point deviation of a
sensor using the residual chlorine
concentration (mg/L).
-
Screen for displaying
the number of days
elapsed since the
last calibration
Displays the number of days elapsed
since the last calibration.
Note:
Displays the accumulated time while the
power is turned ON.
-
When “yES” is set
in “Automatic zero
calibration setting”
Automatic calibration
wait time screen
Displays the time until the next calibration
is started in a format of hours-minutes.
-
Moving average count check setup screen (damping factor)
-
Moving average
count (damping
factor) setting
The moving average count can be
checked and changed.
Note:
Allows you to change the value if the
measured value is not stabilized.
If an error occurs during setup, the setup
screen will return to the previous display.
1 to 120
(times)
*RC: Residual Chlorine
Display
Display condition
Item
Description
Setting range
