Measurement
28
Table 1 List of items displayed in the meas mode
Display
Display condition
Item
Description
Setting range
When
temperature
display is
available
Main display screen
Displays the measured residual chlorine concentration
(mg/L) and temperature (
°
C).
Note:
The temperature may not be displayed depending on the
setting.
Contact output check setup screen (display example when r1 is set)
Tip
The other relays can be set in the same manner.
Reference
Refer to “ Control targets and their available options ” (page 37) for the options available for the selected
control target.
When “non” is set
in “Contact output
type setting”
Relay setting
condition screen (the
numeral at the lower
left indicates the
relay number)
Relay 1 is not used.
Note:
“_ _ _ _” indicates that a relay is not used.
When “CtrL”, “AL”
or “t” is set
When “CtrL”, “AL”
or “t” is set
Set value screen
(residual chlorine or
temperature)
Displays the alarm or control setting
value for residual chlorine or temperature.
The set value can be changed.
z
RC (mg/L)
*
:
0.00 to 3.00
z
Temperature
(
°
C)
0.0 to 100.0
When “CtrL” is set
Control width value
screen
Displays or is used to specify the control
width using the residual chlorine
concentration value.
RC (mg/L)
*
:
0.02 to 1.00
When “AL” or “t” is
set
Delay time screen
Delay time for the relay ON is displayed
or changed in seconds.
0 to 600 (s)
When “HoLd” is
set
Relay setting
condition screen (the
numeral at the lower
left indicates the
relay number)
-
Delay time screen
Delay time for the relay ON is displayed
or changed in seconds.
0 to 600 (s)
