horiba GA-370, Instruction Manual

Page: 58 / 95

4 Various Functions
42
Tip
An event is triggered immediately if set to 0 days.

Resetting the passed times
The elapsed times can be reset when, for example, parts are replaced.
1.
Press the reset button ( ) in the PARTS MANAGEMENT screen or the EACH
PART MANAGEMENT screen.
2. Press the [YES] button in the reset confirmation screen.
If the reset button is pressed in the PARTS MANAGEMENT screen, the elapsed times of
all parts are reset. If the reset button is pressed in the EACH PART MANAGEMENT
screen, the elapsed time of that part is reset.
If the [NO] button is pressed, the previous screen is redisplayed without resetting the
elapsed time(s).
Fig. 46 Reset confirmation screen (Example: PARTS MANAGEMENT screen)