4 RS-232C communications
4.5 Communication example using the HyperTerminal
ES-51
69
4.5
Communication example using the HyperTerminal
For reference, communication using the HyperTerminal
that comes with Windows is described here.
1.
Open the HyperTerminal.
[Start] > [Programs] > [Accessories] >
[Communications] > [HyperTerminal]
The HyperTerminal program (Hypertrm.exe) is
activated.
2.
Make the setting for name, connection, and port.
Select the COM port of the PC currently being used
for the port setting.
3.
Set the COM port of the PC and set the
transmission parameters as follows:
Baud rate: 2400 bps
Character length: 8 bits
Parity: none
Stop bit: 1 bit
4.
Make the settings in the properties dialog box.
[File] > [Properties] > [Settings]
