3 Functions
3.3 Setting modes
ES-51
37
3.
Press the CELL key.
Automatic data storage will end.
During automatic data storage, the MEAS, MODE, SET,
ENTER, keys cannot be used. Data recording time will
differ ± 1 seconds from the time set by the storage
interval. If the number of stored data items exceeds 300,
data storage will stop and the error message “ERR No.
10” will be displayed.
3.3.5 Sample ID# setting
Setting the sample ID# records its sample ID number as
well as the measured data at time the data is stored.
1.
Press the SET key in the Measurement mode to
enter the ID# Setting mode.
2.
Use the ENTER key to select the digit.
3.
Specify a numerical value using the
▲
and
▼
keys.
Setting range: 00000 to 99999
