1 Overview of the Meter
1.6 Connecting the electrodes
10
HORIBA
1.6
Connecting the electrodes
Connect the electrodes to the conductivity meter using
the following procedures. Use special care to ensure
that no water or dirt come in contact with the connector
during connection procedures.
・
Electrode connector: Conductivity electrode
・
Temperature connector: Temperature electrode
●
Electrode connector (G-R electrode)
1.
Insert the electrode connector, making sure to
align the connector grooves with the pins in the
connector port on the main unit (see photo,
①
).
Do not push the electrode with undue force
when the pins are not properly aligned.
Do not perform this step with wet or uncleaned hands.
2.
Push the electrode connector into the connector
port while turning it clockwise, following the
grooves (see photo,
①
and
②
).
COND electrode
CH1
