Chapter 3 Basic Operation
3.2 Settings
DS-71
23
3.2.8 Auto Printer Setting
You can set automatic printout when a printer is
connected.
When this setting is ON, automatic printout is executed
at the following occasions.
・
You perform data memory during measurement.
・
Calibration or check is completed in the calibration
mode.
1.
Press the SET key on the measurement screen,
and press the
▲
or
▼
key to enter the auto printer
setting screen.
2.
Press the ENTER key to enter the auto printer set-
ting change screen.
3.
Press the
▲
▼
or
key to select ON or OFF, and
press the ENTER key.