horiba DS-71, Instruction Manual, Page: 27 / 78

Chapter 3 Basic Operation
3.2 Settings
DS-71 17
3.2.2 Auto Data Memory Setting
Data memory can be performed automatically at a
regular interval.
1.
Press the SET key on the measurement screen,
and press the
▲
or
▼
key to enter the auto data
memory setting screen.
2.
Press the ENTER key to enter the auto data
memory change screen.
3.
Press the
▲ ▼
or key to change ON or OFF, and
press the ENTER key.
4.
If you select
▲ ▼
ON, press the or key to select a
digit and press the
▲
or
▼
key to change the value,
and then press the ENTER key.
Setting range: 2 seconds to 24 hours